Product Introduction
Between the two Bailey trusses sits the deck, and the Bailey bridge transom stringer set is what actually carries it. It's a pre-packed framing kit: transverse cross-girders (the transoms) and longitudinal stringers that together form the load-bearing floor between the parallel trusses. The transoms span across the top chord nodes; the stringers run the length of the bridge and frame into the transoms.
Think of it as the middle layer. Wheel loads hit the deck, the set catches them, and passes them down into the main truss chords. We ship it as a matched set with every fastener and bracket counted, so deck framing goes in fast during erection. It's a core deck part on every Bailey bridge that takes vehicles or foot traffic.
Features
Ships as a matched set - transoms, stringers, cleats, bolts, all pre-counted and packed. The bailey bridge transom stringer set makes this practical.
Galvanized parts stand up to years of weather
The 305 mm stringer spacing takes both timber plank and steel grating deck
Bolted joints mean you can adjust on site and swap a single member without grief
Light enough to manhandle into place with a little crane help
Even transom spacing keeps deck load spread uniformly across the truss
Pre-drilled holes, so there's no cutting or drilling out in the field
Working Principle
The transom is the horizontal beam that lies across the top chord of the two parallel trusses. We clamp it to the chord nodes with transom clamps so it can't move sideways, and it bridges the gap between the trusses while carrying whatever the stringers drop on it. The stringers run longitudinally, parallel to the trusses, bolted to each transom's top flange with angle cleats and set 305 mm apart. The deck - timber, grating, or chequer plate - rests right on top of them. The bailey bridge transom stringer set is built for this.
Here's the load path, top to bottom. A tire loads the deck; the deck loads the stringers, which act as secondary beams spanning between transoms. The stringers pass that down as a row of point reactions to the transoms. The transoms are the primary cross-beams spanning the two main trusses, so they hand the load off as vertical reactions into the truss top chord nodes. Deck → stringers → transoms → truss chords. That tidy hierarchy is what gets vehicle weight into the primary structure efficiently and safely.
Applications
Vehicular Bailey bridges carrying trucks, cars, or emergency vehicles. The bailey bridge transom stringer set makes this practical.
Pedestrian and bicycle Bailey footbridges (lighter stringer sections)
Military bridging where deck framing has to go in fast
Temporary construction access with heavy truck traffic
Permanent semi-permanent Bailey highway bridges
Railway temporary bridges (heavier stringers and rail ties)

