Bailey Bridge Safety Handrail Assembly

Bailey Bridge Safety Handrail Assembly

Open deck, no edge protection — that's an accident waiting to happen. The Bailey bridge safety handrail assembly is the pedestrian protection system we fit along both edges of a Bailey deck. It's tubular steel posts and rails that bracket onto the outer face of the truss top chord or the deck edge stringer, and it keeps people, crews, and passengers from stepping off into the drop.
Send Inquiry
Description
Technical Parameters

Product Introduction

 

Open deck, no edge protection - that's an accident waiting to happen. The Bailey bridge safety handrail assembly is the pedestrian protection system we fit along both edges of a Bailey deck. It's tubular steel posts and rails that bracket onto the outer face of the truss top chord or the deck edge stringer, and it keeps people, crews, and passengers from stepping off into the drop.

We build it to the usual pedestrian guardrail spec - 1.1 m tall with two intermediate rails - and put it together with bolted connections so it goes up quick. Any Bailey bridge open to the public, to workers, or to mixed traffic needs one, and plenty of older bridges get this added later when they finally get pedestrian use.

 

Features

 

Meets the guardrail height and strength spec (1.1 m, two-rail design). The bailey bridge safety handrail assembly makes this practical.

Tubular steel is light but takes a hit without folding

Galvanized finish lasts outside for years

The bracket system bolts on, so you're not drilling into the truss chord

Modular rails join between posts with internal sleeve couplers

Quick-removal sections come down when an over-width load has to pass

Optional safety-yellow paint boosts visibility in dim or industrial settings

 

Working Principle

 

The job is simple: put a barrier between the deck edge and whatever's below. We space the vertical posts one panel apart - 1.524 m - and bolt them to the side of the truss top chord or the edge stringer with galvanized angle brackets. Two horizontal rails run between them, one at mid-height (550 mm) and one at the top (1000 mm). The top rail is the handhold and the main visual stop; the lower one keeps a child or a dropped tool from slipping through. The bailey bridge safety handrail assembly is built for this.

When someone leans or bumps into it, the posts carry that horizontal force into the truss chord through the brackets. We bolt rather than weld on purpose: when an over-width vehicle needs through, the posts unbolt from the brackets and the rails slide out from between them, and you're clear. The galvanizing means that even after years out in the weather, the rail is still sound and still reads as a safety barrier at a glance.

 

Applications

 

Pedestrian footbridges built on Bailey truss girders. The bailey bridge safety handrail assembly makes this practical.

Construction site access Bailey bridges needing worker fall protection

Bailey bridges open to mixed pedestrian-vehicle traffic

Temporary event bridges at festivals, marathons, or race courses

Industrial plant Bailey walkways for process unit access

Military Bailey bridges where personnel safety is mandated by engineer regs

Hot Tags: bailey bridge safety handrail assembly, China bailey bridge safety handrail assembly manufacturers, suppliers, factory, 321 Bailey Bridge, bailey bridge, Compact 200 Bailey Bridge, Compact 200 Bailey Steel Bridge, Compact 200 type Temporary Steel Bridge, Double Lane Bailey Steel Bridge

Send Message