Bailey Bridge Junction Post For Multi-story Truss

Bailey Bridge Junction Post For Multi-story Truss

When one storey of Bailey panels isn't enough for the span or the load, you stack another on top — and the Bailey bridge junction post for multi-story truss is what ties those levels together. It's a vertical steel connector that joins two or more storeys of stacked trusses into one composite deep-truss system.
Send Inquiry
Description
Technical Parameters

Product Introduction

 

When one storey of Bailey panels isn't enough for the span or the load, you stack another on top - and the Bailey bridge junction post for multi-story truss is what ties those levels together. It's a vertical steel connector that joins two or more storeys of stacked trusses into one composite deep-truss system. The post bridges the bottom chord of the upper storey and the top chord of the lower storey, and shifts the shear and moment between them.

Without it, the two levels would act on their own and slide past each other under bending. That's why it's the piece you reach for on double- or triple-storey builds carrying heavy loads over long spans.

 

Features

 

Transfers shear and moment between stacked storeys so they act composite. The bailey bridge junction post for multi-story truss makes this practical.

Standard pin hole pattern matches Bailey geometry - no cutting or modifying panels

Bolted connection takes raker braces and sway bracing at mid-height

Galvanized finish lasts in permanent outdoor installs

Two posts per joint (one each side) keep the load transfer balanced

Built for both double-storey and triple-storey setups

Light enough to position by hand with a little help

 

Working Principle

 

In a multi-storey build, you stack two or more layers of standard panels. The lower storey sits on the abutments or piers; the upper storey sits right on top. The trouble is that the lower storey's top chord and the upper storey's bottom chord don't share load on their own - under bending they'd just slide relative to each other. The junction post kills that slip by connecting the two chords rigidly. The bailey bridge junction post for multi-story truss is built for this.

We pin the post's top end to the upper storey's bottom chord node and its bottom end to the lower storey's top chord node. That rigid vertical link carries the shear between levels, so both storeys bend as a single deep truss instead of two shallow ones. The payoff is the effective depth: a composite deep truss bends far less and carries far more, and the mid-span deflection drops with it. The posts also give you somewhere to hang the diagonal raker braces that stiffen the inter-storey connection further. Leave them out and the upper storey drifts sideways under live load - you've got two separate bridges, not one composite system.

 

Applications

 

Double-storey Bailey bridges spanning 40–60 m under heavy military or highway loads. The bailey bridge junction post for multi-story truss makes this practical.

Triple-storey configs for very long spans or extreme load ratings

Bridges upgraded from single-storey to double-storey without swapping panels

Military heavy equipment crossings (MLC 70+)

Temporary railway bridges with high dead load and dynamic impact

Long-span pedestrian bridges later converted to light-vehicle use

Hot Tags: bailey bridge junction post for multi-story truss, China bailey bridge junction post for multi-story truss manufacturers, suppliers, factory, 321 Bailey Bridge, bailey bridge, Compact 200 Bailey Bridge, Compact 200 Bailey Steel Bridge, Compact 200 type Temporary Steel Bridge, Double Lane Bailey Steel Bridge

Send Message